Skip to main content

Get Started with DaySmart Payments Powered by Stripe!

For DaySmart Salon, Pet, Spa, and Body Art:

Stephanie avatar
Written by Stephanie
Updated this week

If you are looking for an easy way to streamline your payment process and modernize your checkout experience, DaySmart Payments Powered by Stripe has everything you need. We are happy to have you aboard and look forward to helping you simplify and strengthen your payment experience!


Step One: Set up your Hardware

BBPOS WisePOS E & S700 Setup

Included Components:

  • Credit card reader

  • Charger

  • Battery

  1. Remove the battery cover: Use a tool that won’t cause damage, and lift at the small notch located at the lower-left corner on the back.

  2. Insert the battery

  3. Snap the cover back on securely and flip over.

  4. Connect the charging cable: Plug in the charger to ensure it stays powered during updates.

  5. Power on the device: Hold the power button (on the right side) for a few seconds until the device turns on

Product_2021_0398_WisePOS-E.jpg

Connect to Network

  1. Select your language

  2. Select your country

  3. Select your Wi-Fi network: a network with a password is required.

  4. Wait for updates: The device will begin updating its software. This may take some time, so stay patient.

M2

  1. After unboxing, plug the device into the charger (Charging port at the top of the device). Charge the device for at least 30 minutes before setup.

  2. Turn the Stripe Reader M2 on by pressing the button on the side of the device. The status LEDs turn on for 2 seconds and the reader beeps twice.

    • The reader waits for a Bluetooth connection for five minutes before turning off.

  • When the reader connects to a device running your app, the status LEDs on top of the reader flash four times. After connecting, the first status light begins flashing at five-second intervals. The reader stays connected to your iOS or Android device while in standby mode and automatically exits standby mode when you resume activity.

  • When connected, the reader automatically turns off after 10 hours of inactivity. You can turn off the reader manually by pressing and holding the power button for four seconds. You don’t need to turn off the reader to conserve power. When the reader turns off, the four LEDs light up and then turn off one by one to indicate it has turned off.


Step Two: Register to DaySmart

App

  1. In the DaySmart mobile app, click More… at the bottom right, then Settings at the bottom.

  2. Click Credit Card Processing Settings

  3. Click Credit Card Device Settings.

  4. Click the + button in the bottom right corner.

  5. Select the Device Type.

  6. Enter a Name for the device: this is your choice and comes in handy if you have more than one device.

  7. Enter the registration code: Input the code displayed on the screen, make sure to include the dashes.

  8. Click Finish

M2

  1. After selecting the M2 Device (follow until steps 4 above)

  2. Once prompted with the Bluetooth Pairing Request notification on the phone, click Pair.

  3. Follow the prompts on the phone screen to connect the Stripe Reader M2. The app should automatically find the device once powered on.

  4. The app may prompt that it is updating the device. Keep the device powered on and in range and wait for the update to complete. The device will chirp when the update is almost complete.

  5. Once the device is successfully paired, you will be able to give it a nickname. You can use the default name if you would like.

  6. Click Finish.

Cloud

  1. Click on the three dots More.

  2. Select Settings from the menu that appears.

  3. Click Card Processing on the left-hand side menu, and then click Settings again.

  4. Under your Account ID, click + Add Device.

Look for the highlighted button below!

  1. Enter a Device Name. Choose a name that helps you identify the device, especially if you have multiple devices.

  2. Enter the Registration Code displayed on the reader's screen. Make sure to include the dashes in the code.

  3. Click Save


Step Three: Run your First Transaction

As soon as your credit card reader is all set up, you're good to go! Just create a new appointment and get ready to check out. It's that easy!

Don't have a reader or want another option? Use your phone to Tap to Pay!


Step Four: Stripe Dashboard

Stripe offers some great insights into your credit card payments! If you're curious about how to log in and explore the dashboard, we’ve got you covered. Dive in and discover all the helpful features!


Contact Us

Issues with setting up the device or running a transaction, and still have questions? Contact us through our live chat option in our Support Center, email us at [email protected], or schedule a call.

Did this answer your question?