The BBPOS WisePad 3 Device is a bluetooth device and will ONLY work with the DaySmart Salon, Pet, Spa, or Body Art mobile apps.
Setting Up Your Device
Setting up a BBPOS WisePad 3 device is simple and only requires a Bluetooth connection, along with an active stripe account connected to DaySmart Software.
Ensure the device is fully charged by powering the device on by clicking the power button and verifying that the battery icon is full on the top right of the screen.
In the DaySmart mobile app, navigate to More → Settings → Credit Card Processing Settings → Credit Card Device Settings.
Click the + button in the bottom right corner.
On the Device Setup screen, click BBPOS WisePad 3.
Turn the BBPOS WisePad 3 on by pressing the power button.
Once turned on, the WisePad 3 will beep. This beep indicates that the device is ready to be paired.
Follow the prompts on screen to set up the BBPOS WisePad 3. The app should automatically find the device once powered on.
Once the device is successfully paired, you will be able to give it a nick name. You can use the default name if you would like.
Click Finish.
Turn the Reader On and Off
You can turn on the BBPOS WisePad 3 reader by pressing and holding the power button, located at the top right of the PIN pad. The display powers on and shows the device’s splash screen.
The display dims after a few seconds of inactivity. If inactive and disconnected from your application for more than 5 minutes, it beeps and powers off. Turn off the reader manually by pressing and holding the power button until the LED display shows a “Power off?” prompt, then press the green enter button to confirm.
Default Reader Language
The BBPOS WisePad 3 supports changing reader language directly in the reader interface. After you have paired your reader, the reader installs a language pack relevant for your region if one isn’t already in place. To view available language options and to select a language, click the Power / Settings button and scroll down using the arrow keys until you reach the language selection menu. Highlight your desired language and press the green Enter key.